What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 01.07.2025 06:25

A fuse is a non-resetable over current circuit protector.
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
What are some important works of Marcel Proust (novelist)?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
nine
2024–10–10[John johnson John Johnson ]
What Your Sweat Could Reveal About Your Health - CNN
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The bolt then partially travels down the line to your home.
a photo is worth a thousand words.
What do you think about Anthony Scaramucci saying that JD in JD Vance stands for "Just Dull?"
What is lightning?
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Why would a person always be so tired?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This device then solves the entire problem.
2024–10–16 [ OO OLAOYE OYEBODE ]
Why doesn’t Melania Trump do some more modeling?
This one hit behind the barn.
A circuit breaker is similar, but is resettable.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
These are simplified answers to the original question, and does not change anything I wrote above.
(Dc diagram shown, AC is similar).
Stock Market Today: Dow Futures Waver Ahead of U.S.-China Trade Talks — Live Updates - WSJ
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is 'the assistant's answer'
what exactly is a ‘surge’ protector?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
There are three different concepts here that are getting confused.
GUNTHER wins the world heavyweight championship back from Jey Uso - Cageside Seats
Because the load is inductive, the current lags the voltage.(by a bit).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
For this case there are devices called Metal oxide varistors (MOV).
Need For Speed Underground 2 remake leaves fans absolutely floored - GAMINGbible
It also is a device that limits the change in current flow.
At least they know the answer if they wanted it.
I post the exact comment here.
Whooping cough cases rise sharply in Washington and Oregon, health officials urge vaccination - KGW
This is where this question deviates from being a 'generic' question, and becomes more specific.
In schematic diagrams this is the symbol for a fuse:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Steelers TE wants no part of Jonnu Smith trade - Behind the Steel Curtain
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Upvotes:
But… the neutral is now “floating” because of the 1 ohm resistance.
so, what happens?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but I think this circuit , shows a few more pieces.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is where the MOV conducts again, and dissipated the energy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There are two important concepts here.
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
An AC voltage/ current source, and an ac inductive load.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–14 [Omar Gharbi Omar Gharbi ]
The other is “what does a “fuse” do?”
He then describes Rainy Season and Lightning.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but this device (an Inductor) … impedes the rapid changes in the current.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Now when you have a certain ac resistance, then a current flows in a loop.
He then asserts :
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The third is lightning and “how it gets conducted into a home.”
eight
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
[old diagram got deleted by accident]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It seems Mohan does not understand the difference between a comment and an Answer.
But it can get overloaded, and no longer works.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
[image of Common-mode choke]
Barnstars:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes the function of a fuse.
At one ohm, the resistor has a maximum of 1 watt power.
First Sentence:
One
This is the picture of an electronic coil of wire wound around a core of magnetic material.